pull/this/repo
RepoBrowser simulations and WebGPU#electronics#browser-apps#webgpu#simulator

Deadboard: fix a dead laptop motherboard in a free browser game

By Pull This RepoPosted 5 min read

Short answer

Deadboard is a free, Apache-licensed repair trainer that runs in your browser with WebGPU. It puts a broken circuit board on a virtual bench with a multimeter, thermal camera, soldering iron and hot air, and a SPICE-style simulator decides what the meter reads. Its flagship board is the real MNT Reform 2 laptop mainboard with a dead 3.3 V rail.

Deadboard hands you a dead circuit board and the tools a repair technician uses, then lets you fix it in a browser tab. You probe the rails with a multimeter, find the part that is dragging a rail down, desolder it, fit a new one and run the tests. The flagship board is not a toy: it is the real open hardware mainboard of the MNT Reform 2 laptop, with a fault planted on its 3.3 V rail.

What is Deadboard?

Deadboard calls itself a "board-level repair trainer". The circuit runs on a SPICE-style simulator, so, in the README's words, "the meter reads what the circuit really does, not a scripted answer". Each scenario has test-bench objectives; pass them all with the circuit back to its reference design and an encrypted flag unlocks, which is what makes it a game.

The repo was created on 16 November 2026, with release v0.1.0 the same day. It had 107 stars when we checked on 18 November 2026, up from 69 when our video was made the day before. The code is Apache-2.0 and written in TypeScript. The demo boards keep the licences of their source designs.

What is on the bench, per the README:

  • Instruments: a multimeter (volts, ohms, diode, capacitance, current in series), a bench supply with current limit, an oscilloscope, a thermal camera, freeze spray, isopropyl alcohol and rosin
  • Rework tools: soldering iron, hot air, desoldering wick, trace cutter, jumper wire and new parts. Joints can be cold, pads can lift, and a blob in the wrong place shorts a rail
  • Real boards: the MNT Reform 2 laptop mainboard (530 parts) and an Antmicro Jetson baseboard (392 parts), imported from KiCad
  • Walkthrough videos: every premade board has a "how to approach" video and a separate, spoiler-gated solution video

The README also promises "honest numbers": where a value is estimated or a waveform is synthesized, the app says so. Since our video, it has added Russian as a second language and more boardview import formats.

How do you play Deadboard?

There is nothing to install.

  1. Open tholtman1-del.github.io/deadboard in a browser with WebGPU, such as Chrome or Edge 113 or newer, or Safari 26 or newer.
  2. Press Open the bench. A tutorial opens on the first board; keep it on for the beginner track.
  3. Pick a board from the board menu at the top left, or browse all boards and tutorials.

A few keys from the app worth learning first:

KeyTool
Pbench supply on or off
2multimeter probes (left click red, right click or Shift+click black)
3soldering iron
4remove solder bridges, jumpers or parts
9freeze spray: the hot part defrosts first
0isopropyl, to scrub off residue
Tabswitch between 2D and 3D
Fflip the board

How do you fix the dead laptop board?

This is the repair from the authors' own demo video, step by step:

  1. Measure the rail. Power the board and put the red probe on the 3.3 V rail. It reads 0.640 V. Something is shorting it.
  2. Find the hot part. Switch the display to the thermal camera. A shorted part heats up first, and capacitor C173 glows, labelled "hot".
  3. Desolder it. With C173 off the board, the meter jumps back to 3.298 V.
  4. Fit a new capacitor. A 22 µF part goes in its place.
  5. Clean up. Scrub the liquid residue off with isopropyl.
  6. Run the tests. Every rail objective shows Pass, and the flag decrypts.

The project site says the meter behaves like a real 6000-count meter with a 10 MΩ input, so the habits you build here (measure, locate with heat, remove, replace, clean, prove) carry over to a real bench.

Where should a beginner start?

With the six beginner boards, in this order, before the laptop board:

BoardWhat is wrong
First Lighta tiny flashlight stays dark when you press the button
Cold Joint 101every top trace is fine, yet no current flows, so flip the board
Solder Bridge 101the battery delivers current but the LED is dark
One-Way LEDan LED is fitted backwards
Resistor & Ohm's Lawa 100 kΩ resistor sits where the design calls for 150 Ω
Voltage Divider 101the R2 footprint is empty, so the test point never reaches 2.5 V

After those come five training boards (Bridge Troll, Backwards Day, Ghost Short, Smoke Test and The Sagging Rail), then the two open hardware demos.

How do you run Deadboard yourself?

You need Node.js 20 or newer and a WebGPU browser. From the README:

terminal
git clone https://github.com/tholtman1-del/deadboard
cd deadboard
npm install
npm run dev        # http://localhost:5173
npm test           # simulator, import, physics and scenario tests
npm run build      # static site in dist/

You can import your own board as a KiCad .kicad_pcb, a boardview .brd or .tvw, or a shared .pcbfix.json challenge, and plant shorts, opens, leaks, drift and intermittent faults in the Author tab.

What is the catch?

  • It is a simulation. It teaches the method, but it will not fix your real laptop.
  • WebGPU only. Older browsers, and some work computers with WebGPU switched off, will not open the bench.
  • It is days old. Version 0.1.0, so expect changes and bugs.
  • Some values are estimates, and the app flags them.

Who is Deadboard for?

It suits people curious about how technicians diagnose dead boards, students learning to use a multimeter, and hobbyists who want to practise the reasoning before they touch a hot iron. Repair-minded people who already use boardview files will like that it reads the same formats.

What other free circuit simulators are there?

ToolWhat it is
CircuitJS1an analog circuit simulator in the browser with animated current flow
Logisim-evolutiondigital logic design, from gates up to whole CPUs
Qucs-Sa desktop schematic editor on top of SPICE engines such as ngspice
OpenBoardViewopens the boardview files repair technicians use on real boards

What did we run for the video?

We did not clone or build the repo. We opened the hosted site in Chrome on Windows, loaded the MNT Reform 2 board and recorded the bench in 3D ourselves. The repair sequence in the video, from probe to Pass, is the authors' own demo footage.

For more things that run in a browser tab, see pixelfx, 244 pixel art effects drawn in code, and Web Ocean. If you would rather repurpose real hardware, PhoneBox turns an old Android phone into a PC control panel.

Pull it. Stash it.

Questions people ask

Is there a laptop motherboard repair simulator I can play free?

Yes. Deadboard runs free in the browser at tholtman1-del.github.io/deadboard with nothing to install. You get a multimeter, bench supply, oscilloscope, thermal camera, soldering iron and hot air, and one of its demo boards is the open hardware mainboard of the MNT Reform 2 laptop.

What browser does Deadboard need?

A browser with WebGPU. The project site names Chrome or Edge 113 or newer and Safari 26 or newer, and the app mentions Firefox 141 or newer on Windows. If you see a message that WebGPU is not available, try a current Chrome or Edge first.

Is Deadboard good for learning electronics repair?

It teaches the diagnostic method: measure, find the fault, rework, then prove the fix. Six beginner boards start with a dead flashlight and a cold solder joint. The meter is modelled on a real 6000-count meter, but it is still a simulation, so practice on real hardware too.

Can I load my own circuit board into Deadboard?

Yes. The README lists KiCad .kicad_pcb files, boardview files (OpenBoardView or TopTest and BRD2 .brd, Tebo-ICT .tvw) and shared .pcbfix.json challenges. The Author tab lets you plant faults and share the challenge.

Sources

  1. 1Deadboard repository and README
  2. 2Deadboard hosted site
  3. 3Deadboard release v0.1.0 and demo video
  4. 4GitHub API: tholtman1-del/deadboard (stars, licence, language, created date, checked 2026-11-18)
  5. 5sharpie7/circuitjs1
  6. 6logisim-evolution/logisim-evolution
  7. 7ra3xdh/qucs_s
  8. 8OpenBoardView/OpenBoardView

Get tomorrow's repo in your feed

One free, open source repo a day as a short video, shown working, with the catch named. Pull it. Stash it.